2mm Spinning Machine Parts , Electrical Components Spinning Part Of A Machine

Aluminium Spinning Spare Part 2mm For Electrical Components Power Industry

Process:

Metal spinning is a forming process that produces hollow parts that are typically circular in cross-section. The basic metal spinning process starts with a flat metal disc (blank), which rotates on a lathe. This rotating blank is pressed against a tool (chuck mandrel) that duplicates the interior of the part.
Historically metal spinning was associated with prototypes and low volume production time. However, with the introduction of automatic and CNC lathes metal spinning is now a cost-effective option for both medium and high volume production. The relatively inexpensive tooling price still makes this forming method a cost effective one for fabricating prototypes.

Products Application:

Quality Control:

1) Checking the raw material after they reach our factory. Incoming quality control(IQC)
2) Check the details before the production line operated
3) Full inspection and routing inspection during mass production. In process quality control(IPQC)
4) Checking the goods after finished. Final quality control(FQC)
5) Checking the goods before shipment. Outgoing quality control(OQC)


Advantages:

• High quality: The surface roughness is low and the dimension tolerance is small.
• Low Consumption: The total deformation force required is small. greatly reducing the attack rate consumption. The tonnage of rotary press machine is only about 1/20 of that of press machine.
• Variety of products: The products range is wide, according to the rotary press capacity can be made large diameter thin-wall pipe, special pipe, variable section pipe and so on.
• Low cost: High material utilization and low production cost. Compared with machining, rotary press can save 20%-50% of materials, up to 80%, and reduce the cost by 30%-70%.

Why Choose Us:

• 1. For delivery time, which will be 15-35 days after deposit received.
• 2. Accept both large and small order quantity, min order quantity 1 piece is workable.
• 3. Manufacture all size of spinning spare parts products according to customers’ special drawings.
• 4. Convenient transportation from our factory to Shanghai port.
• 5. Unique packaging methods by our professional team.

Packaging:

1. Our company has professional team and adopts developed packaging technology and packaging style to ensure the packaging quality.
2. Standard sea packing, the spinning spare parts packing can be done by wooden case and cartons. The wooden case and parts contact parts must be padded with foamed paper or rubber. Case four corners shall not be smaller than the size of the spinning parts. Spinning parts surface Wrapping foam paper, Four sides contacting with wooden case with foam mat protection.
3. In addition, clear labels are tagged on the outside of the packages for easy identification of the spinning parts measurements and quality information.

• 20 ft - GP: 5.8m (Length) * 2.13m (Width) * 2.18m (Hight) ------ About 23MTS
• 40 ft - GP: 11.8m (Length) * 2.13m (Width) * 2.18m (Hight) ------ About 27MTS
• 40 ft - HG: 11.8m (Length) * 2.13m (Width) * 2.72m (Hight) ------ About 27MTS

Products Display: